Hi,
what is the maximum allowed fuel injection Pulse Width at cranking?
I tried to go over 32ms but looks like something in the software overflows and it displays some weird minus values.
Car starts only if i pump the throttle while cranking,this gives me about 40ms with the accel enrichment.
Car idles with 5-7 ms,2226cm3,5cyl,200cm3/min injectors
Peter
Maximum PW at cranking
3 posts
• Page 1 of 1
Maximum PW at cranking
by pnanassy on Mon Dec 21, 2009 7:06 am
- pnanassy
- Posts: 29
- Joined: Thu Jul 10, 2008 11:33 pm
Re: Maximum PW at cranking
by pnanassy on Fri Dec 25, 2009 7:59 pm
i2 datalog shows reasonable values (39-52ms),so its only the Motec ECU Manager software that has the problem?!
- pnanassy
- Posts: 29
- Joined: Thu Jul 10, 2008 11:33 pm
Re: Maximum PW at cranking
by bing on Thu Dec 31, 2009 11:49 am
check "Post Start" option i think under fuel.
Also tune injection timing will help.
Post cal file see if we can help.
Also tune injection timing will help.
Post cal file see if we can help.
- bing
- Posts: 39
- Joined: Sun Aug 24, 2008 10:52 am
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: Google [Bot] and 27 guests