MoTeC Global Forum

Posted: **Thu Sep 03, 2009 12:55 am**

Will anyone be able to supply a basemap for 93 Toyota MR2 Turbo: Mod detail as below

M800
T3/T4 Turbo
OEM distributor with magnetic ref/sync sensors
GM 3 Bar map sensor
MSD 6AL-2 CDI ignition
supra 550 injector (planning on upgrading to 1000cc borsch saturated injector)

Cheers

Andy

Posted: **Fri Sep 04, 2009 12:57 am**

Guys..
I'm currently running another EMS and is setup at batch firing. If I can calculate the millisec of the injector pulse time on the current fuel map then multiply by 2(since it is currently batch firing and it will be sequential using m800) , Will that be a good idea?

Cheers

Posted: **Wed Sep 09, 2009 7:40 am**

Anyone?

Motec?

Help?

Posted: **Wed Sep 09, 2009 1:43 pm**

I have attached a start file for a 3SG Turbo which should help you to get started. If you are converting from batch fire to sequential doubling the injection duration is a good place to start from. If you are converting from one system to another you need to also make sure that all of the same compensations are being applied.

Posted: **Tue Feb 26, 2013 7:52 am**

.....just so I can find this again

MoTeC Global Forum

basemap request - 3SGTE (MR2)

basemap request - 3SGTE (MR2)

Re: basemap request - 3SGTE (MR2)

Re: basemap request - 3SGTE (MR2)

Re: basemap request - 3SGTE (MR2)

Re: basemap request - 3SGTE (MR2)