MoTeC Global Forum

Hi,
i search the solution to control two solenoid for increase or decrease the turbo boost..
is that possible with the M800?
the wastegate use a spring for 7psi boost. i want to use air pressure (like a pneumatic shifter)to have more boost,
but not more as 30psi. i use a wastegate from Tial.
any idea?
Thanks for all infos

So your waste gate has a port on both sides of the diaphragm?

You only need one control valve, and set it up as per the drawing here
http://motec.com.au/filedownload.php/v14.pdf?docid=1307

The boost control setup in the m800 is comprehensive and you may need some help in setup. If so, please consult your local motec dealer.

Thank you for this!
And what's a good valve to do this job? i think the valve need to work quickly ?
Francois

Get yourself a 4-port solenoid and that will controll both ports of the wastegate from one output from ur motec.

How did you plumb it? Solenoid?

Id very much like to see your installation


Thanks
M