Motec M800 with PDM15

by **ammar.alqisie30** on Tue Jul 04, 2023 7:46 pm

We have a EVO X with M800 ECU and PDM 15, we have an issue with CAN Setup, We need to make the Fans working on PDM related ECT on ecu .

So any idea about the CAN Setup on ECU & PDM .

by **Stephen Dean** on Wed Jul 05, 2023 10:34 am

Hi,

The attached PDM file has the M800 receive channels that you need in it, this uses the standard M800 transmit data.

by **ammar.alqisie30** on Fri Jul 07, 2023 3:43 pm

Thanks Stephen, i got it .

Should we do anything on ecu ( Can Setup ) ?

And how we can activate ALS from keypad ? Keypad connected to PDM, whats the can message ?

by **Stephen Dean** on Mon Jul 10, 2023 10:17 am

I don't have a setup that I can test with at the moment, but as far as I am aware it is not possible to use CAN switches into the Mx00 series of ECU's.

by **super7** on Tue Jul 11, 2023 5:49 am

Stephen Dean wrote:I don't have a setup that I can test with at the moment, but as far as I am aware it is not possible to use CAN switches into the Mx00 series of ECU's.

A long shot.
It is not possible to activate an output on the PDM that has been connected to an input on the M800

by **Stephen Dean** on Tue Jul 11, 2023 10:24 am

That can be done.

by **cotje** on Sat Feb 10, 2024 7:10 am

Stephen Dean wrote:I don't have a setup that I can test with at the moment, but as far as I am aware it is not possible to use CAN switches into the Mx00 series of ECU's.

If have ORB setup working with the Keypad/CDL/M800 combi. Keypad can send data to the CDL and CDL forwards it to the M800. Some conversions were needed to make it work, but with one key I can now go through ORB off/1/2 settings. Works awesome!

Same for different boost-settings btw!

Motec M800 with PDM15

Motec M800 with PDM15

Re: Motec M800 with PDM15

Re: Motec M800 with PDM15

Re: Motec M800 with PDM15

Re: Motec M800 with PDM15

Re: Motec M800 with PDM15

Re: Motec M800 with PDM15

Who is online