Page 1 of 1
DUCATI 48-2 mode 60 flywheel
Posted:
Tue Apr 18, 2017 7:54 pmby DGMmoteur
Hello,
I'm trying to do the initial setup of this engine, someone has the required wiring for this special trigger mode ?
Is it necessary to connect the sync pin to the ref pin ?
Thank you !
Re: DUCATI 48-2 mode 60 flywheel
Posted:
Wed Apr 19, 2017 9:14 amby Auto Sport Elect
Hello,
Yes you join connect the crank sensor to both Ref and Sync.
They are not the easiest engines to get to sync up, especially if they have a lot of light weight components in the rotating assembly.
Re: DUCATI 48-2 mode 60 flywheel
Posted:
Sat Apr 22, 2017 12:46 amby DGMmoteur
Hi !
Thank you for the answer. We have tried several enhancement : make deeper teeths (that's working quite fine), and we have put a hall effect sensor.
Re: DUCATI 48-2 mode 60 flywheel
Posted:
Thu Sep 21, 2017 3:43 pmby Auto Sport Elect
Good to hear.
Best upgrade you can make is going to an M1, they start better than a road bike.
The difference on the same bike from a M800 to and M1 is bigger than I can describe. Well worth the investment.