Suzuki GSXR 1000 K5 RBW M800

Discussion and support for MoTeC's previous generation ECUs.

Suzuki GSXR 1000 K5 RBW M800

Postby thorstengsxr on Mon Feb 29, 2016 7:55 am

Hi

After one and half year building job is done. Now it’s time for track test in spain.

https://www.youtube.com/watch?v=KN5C3pbh0cE&feature=em-upload_owner

regards Thorsten

thx Alan for the DBW engine tip.
thorstengsxr
 
Posts: 51
Joined: Thu Jul 10, 2008 10:00 pm

Re: Suzuki GSXR 1000 K5 RBW M800

Postby AlanB on Wed Mar 02, 2016 9:00 pm

Good to hear that it is up and running Thorsten. The video link doesn't work though.
Alan Bell
MoTeC Europe Ltd
User avatar
AlanB
 
Posts: 104
Joined: Tue May 20, 2008 11:25 pm

Re: Suzuki GSXR 1000 K5 RBW M800

Postby thorstengsxr on Wed Mar 02, 2016 10:40 pm

HI Alan

sorry but the link will be renew in the evening.

regards Thorsten
thorstengsxr
 
Posts: 51
Joined: Thu Jul 10, 2008 10:00 pm

Re: Suzuki GSXR 1000 K5 RBW M800

Postby thorstengsxr on Thu Mar 03, 2016 8:44 am

Hi

Sorry for the delay but now the video is online

https://www.youtube.com/watch?v=HLdJco12u-U&feature=em-upload_owner

regards Thorsten
thorstengsxr
 
Posts: 51
Joined: Thu Jul 10, 2008 10:00 pm

Re: Suzuki GSXR 1000 K5 RBW M800

Postby DimST on Wed May 11, 2016 7:22 am

Nice project!
I wait news when you use the bike!
DimST
 
Posts: 5
Joined: Fri Jan 27, 2012 4:08 am
Location: Athens, Greece

Re: Suzuki GSXR 1000 K5 RBW M800

Postby thorstengsxr on Thu May 12, 2016 4:04 pm

Hi

I use the bike in March at Cartagena Spain. Everything works perfect, the RBW works good only one small problem, the idling speed is a little bit too high 2300 rpm.
Know I’m looking for the next step. I want to bring the electronic in the 21 century and write my own firmware. So I need a M130 with developer license and a C127. But this parts are really expensive for a hobby project and it thanks some time to buy it.

Regards Thorsten
thorstengsxr
 
Posts: 51
Joined: Thu Jul 10, 2008 10:00 pm


Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 14 guests