Page 1 of 1
M800 Group
Posted:
Tue Sep 06, 2011 11:55 pmby insomnia
Hi,
I need a schematic from the M800 or M880 where i can see the different Group.
Can you help me?
Thanks
Francois
Re: M800 Group
Posted:
Wed Sep 07, 2011 5:27 pmby John Reed
I am not exactly sure what you are looking for, but if you look under the "downloads" tab on the MoTeC website you will find links to download user manuals, diagrams/pinouts, etc.
Hope that helps!
Re: M800 Group
Posted:
Wed Sep 07, 2011 6:33 pmby insomnia
hi John,
For exemple, SDL3 is wired like this:
fUNCTION PIN COLOUR
Group 1 SPD1 23 GREY
0V Sen 37 BLACK
8V Sen 13 WHITE
Group 2 SPD2 26 VIOLET
OV Sen 37 BLACK
8V Sen 13 WHITE
Etc....
The wires should be taped into groups..
I need the same for M800 or M880...
Thank You
Regards
Francois
Re: M800 Group
Posted:
Thu Sep 08, 2011 4:09 amby PaulGM
Francois,
There is no document specifying how each and every sensor should be wired up, this depends on the sensor itself. As far as combining a number of sensors into a harness, you will again be constructing something that is unique to your application and will not have any sort of governing documentation.
Our best suggestion for you is to have the dealer you purchased equipment from aid you in designing and building a harness. If you bought the equipment secondhand, you can still contract your local MoTeC dealer for support in this endeavor.