CAN adresses
Posted: Sun Feb 27, 2011 1:31 amLooking for a table of CAN addressees which are reserved or anyhow used by MoTeC devices and protocols.
Or maybe easier... Free addresses
Or maybe easier... Free addresses
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
CAN adresses
Page 1 of 1
Posted: Sun Feb 27, 2011 1:31 amRe: CAN adresses
Posted: Fri Mar 04, 2011 8:03 amWe normally recommend addresses in the range 0x600 to 0x7FF, there are other addresses that you can use but they do vary depending upon the hardware you are using.