Page 1 of 1
Ref sync mode for single cylinder 2 stroke.
Posted:
Wed Aug 25, 2010 8:33 amby IDP
Can anyone suggest the best Ref sync mode to use with a single cylinder 2 stroke.
1 magnetic crank sensor, no sync sensor.
Many thanks.
Re: Ref sync mode for single cylinder 2 stroke.
Posted:
Wed Aug 25, 2010 3:59 pmby stevesingo
Being a 2 stroke, it shouldn't need a sync sensor. 36-1, 60-2 ect should work.
HTH
Steve
Re: Ref sync mode for single cylinder 2 stroke.
Posted:
Thu Aug 26, 2010 1:13 pmby RossB
A 36-2 would probably be best. Is this engine electric start?
Re: Ref sync mode for single cylinder 2 stroke.
Posted:
Thu Aug 26, 2010 5:06 pmby IDP
No electric start.
It's a push start racing bike.
The std trigger wheel has 1 short tooth followed by 1 long tooth. Is there any mode where this could be used?
Re: Ref sync mode for single cylinder 2 stroke.
Posted:
Fri Aug 27, 2010 9:50 amby RossB
We wouild need to see the trigger pattern but it doesn't sound like smething that would work very well with M800. THe 36-2 should be ok though.