Does anyone know where or who makes a chopper disk with a OD of between 100mm - 110mm?
Or the CAD code so I can get one cut.
If I can find one that size I can run it behind the gilmer.
Chopper Disks
4 posts
• Page 1 of 1
Chopper Disks
by rx7brain on Tue Mar 23, 2010 1:32 pm
- rx7brain
- Posts: 9
- Joined: Mon Mar 22, 2010 7:33 pm
- Location: Brisbane, Australia
Re: Chopper Disks
by figgie on Wed Mar 24, 2010 7:32 am
What type of choper disk are you looking for?
I have attached the 60-2 and 36-1 dimensions, these where copied from Bosch (they are the inventors of it).
I have attached the 60-2 and 36-1 dimensions, these where copied from Bosch (they are the inventors of it).
- Attachments
-
- Bosch 60-2 dimensions
- Bosch_60-2_Dimensions.JPG (226.36 KiB) Viewed 8384 times
- figgie
- Posts: 135
- Joined: Fri Jul 11, 2008 4:22 am
- Location: Minnesota, USA
Re: Chopper Disks
by Turby on Thu Mar 25, 2010 4:31 am
You could try http://www.emachineshop.com/ which allows you to design and draw what you want and then get the part made
- Turby
- Posts: 36
- Joined: Wed Dec 31, 2008 10:59 pm
Re: Chopper Disks
by rx7brain on Sat Mar 27, 2010 8:26 pm
Thanks Turby and Figgie.
Great info.
I ended up sourcing one nearly exactly the size I was after from a place in the UK, triggerwheels.com.
AU$45 delivered, figured that would be hard to beat.
That emachineshop concept is awesome, I will remember that.
Great info.
I ended up sourcing one nearly exactly the size I was after from a place in the UK, triggerwheels.com.
AU$45 delivered, figured that would be hard to beat.
That emachineshop concept is awesome, I will remember that.
- rx7brain
- Posts: 9
- Joined: Mon Mar 22, 2010 7:33 pm
- Location: Brisbane, Australia
4 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 8 guests