Page 1 of 1
Driving a stock speedo from an M800 output?
Posted:
Fri Mar 19, 2010 8:58 amby Chris Wilson
I have a Swedish made Tractive sequential gearbox in my RWD R33 GTR. It has no speed sensor in it. I was wondering if I could use a redundant ABS wheel speed sensor on a front hub to feed the M800 with a wheel speed signal, and output a signal to the stock speedo that it understands and is numerically corrected, if you see what I mean? Thanks!
Re: Driving a stock speedo from an M800 output?
Posted:
Fri Mar 19, 2010 9:47 amby IJ.
From memory to snag here is the 17Hz minimum that the m800 can output.
(I'm sure one of the MoTeC guys will correct me if I'm wrong)
Re: Driving a stock speedo from an M800 output?
Posted:
Tue Mar 23, 2010 3:33 pmby Martin
1. The M800 does not have a variable freq output.....except for the RPM signal.
2. ABS Wheelspeed sensors are not really the easiest things to read, especially with an M800. Do you have a DMC? What type of sensor is it?