MoTeC Global Forum

Hey ... i have camry ( aurion ) v6 3.5 >>> 2gr-fe engine


My questions :

if i can use MoTeC what the best Option ? what the best MoTeC for this engine ? M600 or M800 ?


if i use the MoTeC how much horsepower can i get if the car stock ?


my first goal I want to put a ( headers .. intake system .. exhaust systems )


I am thinking and I want to put a turbocharger in a few months after headers .. intake system .. exhaust systems


What i need to do my car MoTeC ? only puy Engine Management or what i need more ?


>>>> I need the answer to each question please <<<<

Thanks ... Nasser

Here are a few answers, I leave it to smarter people than I to do the rest.

THe-PuNiSHeR wrote:Hey ... i have camry ( aurion ) v6 3.5 >>> 2gr-fe engine

Nice car - It might be good enough stock

THe-PuNiSHeR wrote:if i use the MoTeC how much horsepower can i get if the car stock ?

Zero.
If the tune is already good, then you will see no gain as the tune is already perfect.

THe-PuNiSHeR wrote:Hey ... i have camry ( aurion ) v6 3.5 >>> 2gr-fe engine
I am thinking and I want to put a turbocharger in a few months after headers .. intake system .. exhaust systems

Headers and then a turbo (or intake and then a turbo) does not make a great deal of sense; as both the headers and intake change when going with a turbo.

Again - It might be worth considering leaving the Camry stock as it is already go, and then getting another car to dedicate to a project.

In any case you would probably be wise to carefully decide on a route to good, and then wait a while to make sure - before going down a path and then redoing everything shortly thereafter.
Going the fast decision route is great news for the engine builder.
I have spent about 3 years figuring out what upgrade to make, but some say that I am a bit slow to begin with.

Which ever way you decide to go, best of luck with it.
~Holmz

Holmz wrote:Here are a few answers, I leave it to smarter people than I to do the rest.

THe-PuNiSHeR wrote:Hey ... i have camry ( aurion ) v6 3.5 >>> 2gr-fe engine

Nice car - It might be good enough stock

THe-PuNiSHeR wrote:if i use the MoTeC how much horsepower can i get if the car stock ?

Zero.
If the tune is already good, then you will see no gain as the tune is already perfect.

THe-PuNiSHeR wrote:Hey ... i have camry ( aurion ) v6 3.5 >>> 2gr-fe engine
I am thinking and I want to put a turbocharger in a few months after headers .. intake system .. exhaust systems

Headers and then a turbo (or intake and then a turbo) does not make a great deal of sense; as both the headers and intake change when going with a turbo.

Again - It might be worth considering leaving the Camry stock as it is already go, and then getting another car to dedicate to a project.

In any case you would probably be wise to carefully decide on a route to good, and then wait a while to make sure - before going down a path and then redoing everything shortly thereafter.
Going the fast decision route is great news for the engine builder.
I have spent about 3 years figuring out what upgrade to make, but some say that I am a bit slow to begin with.

Which ever way you decide to go, best of luck with it.
~Holmz

Thanks you for the answers >> i need other ??

i need some answer PLZ ??

if i can use MoTeC what the best Option ? what the best MoTeC for this engine ? M600 or M800 ?


if i use the MoTeC how much horsepower can i get if the car stock ?


my first goal I want to put a ( headers .. intake system .. exhaust systems )


I am thinking and I want to put a turbocharger in a few months after headers .. intake system .. exhaust systems


What i need to do my car MoTeC ? only puy Engine Management or what i need more ?

i need some answer PLZ ??