Dual rpm error window

[Wolf_Tm250]

Hi,
anytime I press the clutch and hit dual rpm limit, I get an error window on my Car-PC that stays there until i press "OK" in the window:
any idea how not to get this error window anytime I am in those conditions?

Thank you.

[SprinterTRD]

The error is displayed because dual rpm is active and you shouldn't tune a engine when it is active.

[Wolf_Tm250]

The error is displayed because dual rpm is active and you shouldn't tune a engine when it is active.

Ok thanks, makes sense.

So is there any way to remove this warning?

Thanks.

[SprinterTRD]

Yep, don't activate the dual rpm rev limit when you have the laptop connected!

[Wolf_Tm250]

Yep, don't activate the dual rpm rev limit when you have the laptop connected!

Unfortunately this is not a solution...
I built a m400 permanent connected car-pc to have in dash gauges, so my "laptop" is always connected...

Wolf

[SprinterTRD]

I would sat that the warning is hard coded into the PC tuning software.

The only way to get around it is to possibly get the Telematry upgrade and use Telematry monitor for your display instead of the Tuning software.

[Wolf_Tm250]

I would sat that the warning is hard coded into the PC tuning software.

The only way to get around it is to possibly get the Telematry upgrade and use Telematry monitor for your display instead of the Tuning software.

Ohh thanks!
Didn't thought about this opportunity...

Wolf