immediate fuel accel

Discussion and support for MoTeC's previous generation ECUs.

Re: immediate fuel accel

Postby Martin on Thu Apr 22, 2010 2:23 pm

Drop it just enough that the accel fuel works well. If accel happens to easily closed loop will not work, Remember that closed loop cuts out as soon as there is accel fuel.


Im still wondering what the actual accel value is that will trip closed loop..........cause its not anyting >0
User avatar
Martin
Pro User
 
Posts: 640
Joined: Thu Jul 10, 2008 2:57 am
Location: Pretoria, Suid Afrika

Re: immediate fuel accel

Postby Marc on Sun May 16, 2010 3:19 am

Thanks for all guys quickly reply. :)

I set accel threshold to several value lower than 25.

I feel that is near 2 or 3 and sensitivity 200 is the best.

But is not very perfect.

I have try a lot of combination setting. :roll:

But I still like to use a lean lambda 0.97 from idle

Is it must set to rich lambda 0.87?

Or lean map is impossible improve the problem. :?

Please give me some suggestion.

Marc
Marc
 
Posts: 8
Joined: Mon Jun 15, 2009 1:03 am

Previous

Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 17 guests