Hello:
My first post here. Which is the recommended Dwell Time for the following GM type Ignition Coil ?
Specs
Primary .2-.7 ohms (.45 ohms)
Secondary 6K-11K ohms
Inductance near 2.8 mH
Does the M400 adjust the Dwell time automatically based on engine operating conditions?
Thanks in advance.
GM Type Waste Spark coils Dwell Time
3 posts
• Page 1 of 1
GM Type Waste Spark coils Dwell Time
by Turbocab on Mon Jul 27, 2009 3:13 pm
- Attachments
-
- GM_Coil.jpg (15.03 KiB) Viewed 6843 times
- Turbocab
- Posts: 6
- Joined: Sun Jul 05, 2009 11:23 pm
Re: GM Type Waste Spark coils Dwell Time
by MarkMc on Tue Jul 28, 2009 10:12 am
It does not look like we have the exact dwell curve for that coil (we really need part numbers, etc.) so it would be best to have it tested to make sure you have it set up right in the ECU.
The Dwell settings in the ECU are in the form of a 3D table. Generally the table is only 2D based on battery voltage.
The Dwell settings in the ECU are in the form of a 3D table. Generally the table is only 2D based on battery voltage.
- MarkMc
- Posts: 589
- Joined: Thu May 01, 2008 1:28 pm
Re: GM Type Waste Spark coils Dwell Time
by Turbocab on Sun Aug 02, 2009 12:00 pm
Hello Mark:
Thanks for your reply. I will like to send one coil for testing. Please, let me know how I can do it. Thanks.
Thanks for your reply. I will like to send one coil for testing. Please, let me know how I can do it. Thanks.
- Turbocab
- Posts: 6
- Joined: Sun Jul 05, 2009 11:23 pm
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 11 guests