motorcycle starter button with clutch in

[nappinj]

I have my starter button wired to input and clutch wired to input and starter solenoid to output. is there a way to make it has to see clutch in before starter input would turn on output? m880

[David Ferguson]

Use an aux output table, set the X axis to the Clutch Switch Input, and the Y Axis to the Starter Switch Input, then fill in the table with the conditions when you want the output to be driven.

[nappinj]

thanks but inputs are not on options

[nappinj]

I got at5 to work as a button thought. I had to put .4 low and .5 hi to make it work