Can I use an M400 on Ducati Panigale

Discussion and support for MoTeC's previous generation ECUs.

Can I use an M400 on Ducati Panigale

Postby Gomerz on Fri Nov 21, 2014 5:25 pm

Hi, I am hoping someone can advise If I can use an m400 on the Ducati Panigale 899 and if the m400 will be able to control the drive by wire?

Thanks.
Gomerz
 
Posts: 3
Joined: Fri Nov 14, 2014 11:08 am

Re: Can I use an M400 on Ducati Panigale

Postby cra5hdown on Sat Nov 22, 2014 4:07 am

Yes you can, you would need to enable the drive by wire option also if you plan to buy one I would get a marine one b/c it would be exposed to the elements.
cra5hdown
 
Posts: 21
Joined: Thu Jan 23, 2014 1:14 am

Re: Can I use an M400 on Ducati Panigale

Postby Gomerz on Sat Nov 22, 2014 8:15 am

Thanks mate, I was aware that dbw would need to be enabled, I was more curious if the panigale uses CAN to control the dbw motors like the BMW s1000rr?

And if I would need a DBW4 or not as I believe the panigale has 2 separate tb motors bit I believe they are controlled together.
Gomerz
 
Posts: 3
Joined: Fri Nov 14, 2014 11:08 am


Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 26 guests