Raheel Farouk wrote:Hi
I am trying to wire a switch to turn launch control on/off. But when I go into the digital input function selection there is no option for launch control. But there is an option for traction control. I don't have traction control setup. I only want launch control. Will selecting the traction control function turn on launch control on/off? Any help will be appreciated.
Thanks
Yes, Launch Control is part of Traction Control, you have to enable TC by enabling a slip calculation mode that calculates speeds in the TC setup menu, just set all the TC gains to 0 and TC Max power reduction table at 0 and you will be able to use LC without tripping TC. slip calc modes 1, 3 and 5 turn on drive speed and ground speed.
In traction control/ additional setup you have the option of enabling/disabling both LC and TC or only one of them with the switch.
Also you have to enable TC by setting up the slip calc mode in order to log and display ground and drive speed, with TC off (slip calc mode = 0) ground and drive speed will not be calculated and displayed.
You will also probably want to set up your gear detection as well.