Sync Status
Posted: Thu May 21, 2009 10:47 amcan not get sync status to go ( OK ) - ref and sync sensor are state they are ok -Help
MoTeC Global Forum
The official support forum for MoTeC products
https://forum.motec.com.au/
Sync Status
Page 1 of 1
Posted: Thu May 21, 2009 10:47 amRe: Sync Status
Posted: Thu May 28, 2009 11:26 amAre you seeing an RPM reading when cranking? It would be a good idea to crank the engine with the plugs removed and see what errors are present while it is cranking. Remember that you will have to manually clear the errors while it is cranking and see which ones re-appear.