m4 on a ford zetec
Posted: Sun Mar 01, 2009 6:17 pmim tying to locate the nessary info on fitting the m4 on a kit car with a ford zetec ,
ive read in the spec of the m4 that it suports edis but cannot find any firther information on this
in the ignition setting the SAW which is a wire on the edis module ,
cheers andi
ive read in the spec of the m4 that it suports edis but cannot find any firther information on this
in the ignition setting the SAW which is a wire on the edis module ,
cheers andi