Page 1 of 1
m4 fuel pump
Posted:
Mon May 12, 2014 11:37 pmby andy_hstad
Hey. Can i use one of the outputs for controlling the fuel pump so that it only runs when the engine is running and if so, how do i do that.Or should I use a vw relay and switch 31b to any type of control
Regards
andreas
Re: m4 fuel pump
Posted:
Tue May 13, 2014 7:31 amby stevesingo
I think you can just set the run on ign on to 0.0sec, so the pump does not prime.
Re: m4 fuel pump
Posted:
Mon May 19, 2014 12:33 amby andy_hstad
I have connected the fuel pump to pin 36 and set it to 1 sec and i do not stop. it just go on. this isen the way i wanted.what do i do?
Regards
andreas