M4 Base Maps

Discussion and support for MoTeC's earlier generation ECUs

M4 Base Maps

Postby senordos on Tue Nov 20, 2012 9:08 pm

Hi there,

I notice that base maps are available on the web page for the newer Motecs and also that some old base maps are still available as they've been passed over by Motec on this forum.

Is there somewhere where I can access the base maps for the M4?

I'm quite new to all this so not really ready to make one from scratch!

Thanks,

Christian
senordos
 
Posts: 17
Joined: Mon Nov 19, 2012 5:03 am

Re: M4 Base Maps

Postby YuriK on Mon Nov 26, 2012 1:23 pm

Hi Christian,
what engine do you need the base map for? We don't have base maps for every engine, but we may just have something that will help you in the beginning.

Regards!
YuriK
 
Posts: 78
Joined: Fri Nov 26, 2010 8:16 am

Re: M4 Base Maps

Postby senordos on Tue Nov 27, 2012 7:57 pm

Hi Yurik,

It's for a Toyota 3SGTE as found in the MR2 Turbos and Celica GT-Fours.

Many thanks,

Christian
senordos
 
Posts: 17
Joined: Mon Nov 19, 2012 5:03 am

Re: M4 Base Maps

Postby YuriK on Thu Nov 29, 2012 11:37 am

Sent to the email
YuriK
 
Posts: 78
Joined: Fri Nov 26, 2010 8:16 am

Re: M4 Base Maps

Postby oakie on Sat Feb 16, 2013 1:49 am

hi
by any chance would you have a base map for a m4 in a mitsubishi evo 3 please
oakie
 
Posts: 1
Joined: Fri Feb 15, 2013 4:29 am

Re: M4 Base Maps

Postby YuriK on Tue Feb 26, 2013 11:10 am

Sent via email
YuriK
 
Posts: 78
Joined: Fri Nov 26, 2010 8:16 am

Re: M4 Base Maps

Postby hornet75 on Thu Apr 11, 2013 9:01 am

gday any chance you would have a m48 4age 20v base map.thanks
hornet75
 
Posts: 21
Joined: Sun Dec 20, 2009 10:11 am

Re: M4 Base Maps

Postby Steve thomas on Mon Apr 15, 2013 3:42 pm

Anything for LS1 and LS3? M48 and expander.
Thanks.
Steve thomas
 
Posts: 7
Joined: Tue Feb 12, 2013 11:51 pm

Re: M4 Base Maps

Postby chuscan on Mon Apr 29, 2013 11:58 pm

Steve thomas wrote:Anything for LS1 and LS3? M48 and expander.
Thanks.


crank trigger wheel ???????

LS1 24 tooth reluctor
LS3 60 tooth reluctor
chuscan
 
Posts: 2
Joined: Mon Feb 07, 2011 12:34 am

Re: M4 Base Maps

Postby Steve thomas on Wed May 29, 2013 11:42 am

60-2 crank, 4 on Cam. Thanks
Steve thomas
 
Posts: 7
Joined: Tue Feb 12, 2013 11:51 pm

Next

Return to M4 and M48 ECUs (including M2R and MLS variants)

Who is online

Users browsing this forum: No registered users and 5 guests