M48 pro Aux 1 boost control ?
Posted: Tue Apr 17, 2012 5:10 amTried enabling this in the software and selecting a load axis for the table ( offline ). Plain and simple duty controlled, no PID's
But the main x/y axis remain at zeros no matter what is selected ?
if I set Aux 1 to a generic PWM output the load axis are fine with TPS/RPM units as required.
M48_61 ecu
Am I missing something ?
But the main x/y axis remain at zeros no matter what is selected ?
if I set Aux 1 to a generic PWM output the load axis are fine with TPS/RPM units as required.
M48_61 ecu
Am I missing something ?