MLS to M2R
Posted: Wed Mar 07, 2012 12:19 amWe have an MLS (with all the options) that we were using on our LS1. We have decided to change back to a 13b in our RX7...
I was wondering if there is anyway we could retain the MLS (convert it to the M2R firmware) for use with the rotary engine. Looking at the specs or the 2 units they seem to be the same thing apart from maybe the software onboard.
I was wondering if there is anyway we could retain the MLS (convert it to the M2R firmware) for use with the rotary engine. Looking at the specs or the 2 units they seem to be the same thing apart from maybe the software onboard.