I have a set of these injectors
9http://www.racetronix.com/3145FM.html), but not sure what current i need to set it as in the motec software. Any ideas?
Injector Current
3 posts
• Page 1 of 1
Injector Current
by Begbie on Tue Dec 16, 2008 6:03 am
- Begbie
- Posts: 5
- Joined: Tue Dec 02, 2008 9:22 pm
Re: Injector Current
by MarkMc on Wed Dec 17, 2008 11:17 am
Hello Begbie,
The current "should" be about 3amps but it is not really possible to give an exact answer without testing the injecotr. The spec sheet does not seem to list anything.
We have callibrated the 11405 injector though which is slightly bigger at about 100lb/hr.
The current "should" be about 3amps but it is not really possible to give an exact answer without testing the injecotr. The spec sheet does not seem to list anything.
We have callibrated the 11405 injector though which is slightly bigger at about 100lb/hr.
- MarkMc
- Posts: 589
- Joined: Thu May 01, 2008 1:28 pm
Re: Injector Current
by Begbie on Thu Dec 18, 2008 1:27 am
Thanks for that Mark, seems to be doing the job nicely 
- Begbie
- Posts: 5
- Joined: Tue Dec 02, 2008 9:22 pm
3 posts
• Page 1 of 1
Return to M4 and M48 ECUs (including M2R and MLS variants)
Who is online
Users browsing this forum: No registered users and 14 guests